1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 inductors (coils) > chip inductor (chip coil) > power inductor (multilayer type) 2012.11.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. chip inductor (chip coil) power inductor (multilayer type) lqm2hp_j0 series (1008 size) c dimensions (in mm) 2.50.2 0.60.2 2.00.2 1.10.1 c packaging code packaging minimum quantity l 180mm embossed tape 3000 b bulk(bag) 1000 c rated value ( p : packaging code) part number inductance rated current dc resistance self resonance frequency (min.) LQM2HPN1R0MJ0 p 1.0h 20% 1500ma 0.09ohm 25% 70mhz lqm2hpn2r2mj0 p 2.2h 20% 1000ma 0.12ohm 25% 40mhz lqm2hpn3r3mj0 p 3.3h 20% 1000ma 0.12ohm 25% 30mhz test frequency: 1mhz class of magnetic shield: magnetic shield of ferrite operating temperature range: -55 to +125c c inductance-frequency characteristics (typ.) 0.1 1 10 inductance ( h) 0.1 1 10 100 frequency (mhz) 1.0 h 2.2 h 3.3 h c inductance-current characteristics (typ.) 0.1 1 10 10 100 1000 10000 current (ma) inductance (h) 1.0h 3.3h 2.2h continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 inductors (coils) > chip inductor (chip coil) > power inductor (multilayer type) 2012.11.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. continued from the preceding page. c temperature rise characteristics (typ.) current (ma) temperature rise (c) 40 30 20 10 0 0 500 1000 250 750 1250 1500 2.2h 3.3h 1.0h c ! caution/notice ! caution (rating) do not use products beyond the rated current as this may create excessive heat. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
